cortex
12.5 multichannel system / modular / dj booth
1x Midas M32R LIVE
Compact 40-input digital mixing console with 16 Midas PRO mic preamps, 25 mix buses, and 17 motorised faders. Includes 8 true-stereo effects engines, 192 kHz ADC/DAC converters, and a DN32-LIVE expansion module providing 32-channel USB 2.0 multitrack recording. Features a 7-inch full-colour touchscreen display.
1x Sony VPL-FX30
3LCD installation projector delivering 4,200 ANSI lumens at XGA (1024×768) native resolution using Sony BrightEra 0.79-inch panels for improved contrast and reduced flicker. Supports HD input signals including 720p, 1080i, and 1080p with a 2000:1 contrast ratio.
1x Ampeg SVT-810E
800-watt sealed bass cabinet built on Ampeg's original 1969 infinite-baffle design, housing eight 10-inch drivers with 2-inch voice coils in a Baltic birch plywood enclosure. Delivers 100 dB sensitivity and a peak SPL of 130 dB, handling 800 W mono or 2×400 W stereo at 4 Ω mono / 2×8 Ω stereo impedance.
8x Meyer Sound MM-4XPD (135 Hz – 17 kHz)
Self-powered miniature loudspeaker in the hypercardioid variant, designed for installations requiring controlled rear rejection and tight dispersion in reverberant spaces. Integrates a Class-D amplifier with Meyer Sound's IntelligentDC technology, powered and fed audio over a single EN3 5-pin cable.
4x Meyer Sound MM-10XP (35 Hz – 208 Hz)
Self-powered miniature subwoofer with a single 10-inch driver and onboard Class-D amplifier with integrated DSP for crossover alignment, driver protection, and phase correction. Achieves 118 dB linear peak SPL across a 33–228 Hz operating range, powered by an external 48 V DC IntelligentDC supply.
2x Meyer Sound VLFC (13 Hz – 30 Hz)
Self-powered very-low-frequency system using two 18-inch long-excursion drivers and a 5,600 W peak Class AB/H bridged amplifier, covering 13–30 Hz (±4 dB) — the lowest operating range of any Meyer Sound product. Designed to extend the system into infrasonic territory, producing 125.5 dB peak SPL.
1x Pioneer DJM-V10-LF
Six-channel professional DJ mixer with a 64-bit mixing engine and 32-bit A/D and D/A converters. Features a 4-band EQ per channel with an integrated per-channel compressor, a 3-band master isolator, and a send/return FX loop. The -LF suffix designates 60 mm long faders in place of the standard 45 mm. Supports rekordbox DVS, Serato DVS, and TRAKTOR PRO 3.
2x Pioneer CDJ-3000x
Pioneer's flagship standalone media player with a 9-inch full-colour HD touchscreen and a redesigned jog wheel with reduced touch latency. Connects via Gigabit Ethernet Pro DJ Link for up to six units, with CloudDirectPlay enabling direct streaming from rekordbox without a USB drive. Compatible with Serato DJ Pro and TRAKTOR PRO 3 via USB-HID.
2x Ecler Warm2 Rotary Mixers
Two-channel analogue rotary mixer built around Alps Blue Velvet potentiometers, with a 3-band full-cut EQ per channel and a 3-band master isolator with crossover points at 300 Hz and 4 kHz (±infinity/+12 dB, 24 dB per octave). Accepts two phono and three line sources per channel, with XLR master output and RCA booth output.
2x Denon DJ SC6000M [ 500 GB HD Archive — linked ]
Standalone media player with an 8.5-inch motorised platter driven by a brushless DC motor with adjustable torque, paired with a 10.1-inch multi-touch display. Streams directly without a laptop from Beatport LINK, Beatsource LINK, SoundCloud GO+, TIDAL, and Dropbox via built-in Wi-Fi. 24-bit/96 kHz audio output; supports AIFF, FLAC, ALAC, and WAV formats.
2x Technics SL-1210MK7
Direct-drive turntable built around a coreless motor that eliminates cogging for smoother rotation, producing 1.8 kgf·cm starting torque and reaching 33⅓ rpm from standstill in 0.7 seconds. Features four-step adjustable torque and brake speed, ±8%/±16% digital pitch control, and an S-shaped universal static-balance tonearm with 230 mm effective length.
2x Ortofon Concorde MKII
Moving magnet cartridge in Ortofon's integrated Concorde body format, designed for DJ applications with robust groove tracking at higher stylus forces. Produces 6 mV output, frequency response of 20–20,000 Hz, and is built for repeated back-cueing and scratching with consistent channel separation and minimal sibilance distortion.
2x Tascam 202MKVII Cassette Decks
Rackmount dual-cassette deck with two independently recording transport decks, supporting Type I (normal) and Type II (chrome) tapes. Outputs digitised audio via USB 2.0 at up to 48 kHz/16-bit and provides ±12% pitch/tempo adjustment per deck. Used for playback and recording of the station's cassette archive.
2x Sennheiser HD 25
Lightweight supra-aural closed-back monitoring headphone with a rotating capsule for single-ear monitoring and a split headband to reduce low-frequency resonance transmission. 70 Ω impedance, rated to 120 dB SPL, THD below 0.3%, weighing 140 g. Industry standard in broadcast and DJ monitoring environments.
1x Apple Mac Mini M2 running Max/MSP — BUTT
Dedicated machine running Max/MSP for real-time audio routing and signal processing, paired with BUTT (Broadcast Using This Tool) for encoding and streaming the live signal to p-node.org. Built around Apple's M2 chip (8-core CPU, 10-core GPU) with up to 24 GB unified memory and Thunderbolt 4 connectivity.
1x Apple Mac Mini M2 running VLC
[ 24/7 Streaming via p-node.org ]
Always-on machine running VLC for continuous automated streaming, maintaining the station's 24/7 broadcast when no live session is active. Serves the archive as a continuous programmed stream through p-node.org, running on the same M2 platform as the live machine.
1x Motu 16A
32-in/34-out audio interface offering 16 balanced TRS analogue inputs and 16 analogue outputs, two banks of 8-channel ADAT optical I/O, dual Thunderbolt 4/USB 4.1 ports, and two Gigabit AVB Ethernet ports for networked audio distribution. Dynamic range reaches 120 dB (A-weighted) on line inputs, with sample rates up to 192 kHz.
1x 5:4 Multi-Touch Panel
Resistive multi-touch display in 5:4 aspect ratio used as an interactive control surface. Configured for custom interface layouts in Max/MSP, enabling tactile control of processing parameters, stream management, and archival playback.
2x Meyer Sound MM-4XPD (Outdoors) (135 Hz – 17 kHz)
Weatherised version of the MM-4XPD for the outdoor listening area. Same hypercardioid dispersion pattern and IntelligentDC powering as the indoor units, with UV and moisture resistance for outdoor installation.
1x Meyer Sound MM-10XP (Outdoors) (35 Hz – 208 Hz)
Self-powered subwoofer for the outdoor system, matched to the outdoor MM-4XPD array for full-range coverage in the exterior listening zone. Same onboard DSP and 33–228 Hz operating range as the indoor subwoofer.
ALM. ASQ-1: Multimode Sequencer
8-step sequencer with multiple operational modes including traditional step, Euclidean, and chord sequencing. Independent CV and gate outputs with clock division and pattern chaining.
ALM. Mega Tang: Four Channel Linear VCA and Stereo Mixer
Four independent linear VCAs with individual CV control, configurable as a four-channel mono processor or a two-channel stereo submixer. Unity-gain design for transparent signal routing.
ALM. Squid Sample: 8 Channel Audio & CV Sampler
Eight-track sampler loading audio and CV files from SD card. Each channel has independent pitch, trigger, loop, and direction control, enabling complex polyphonic or percussive playback arrangements.
ALM. MCO (Legacy): Compact Digital VCO
Compact digital oscillator with multiple waveform outputs — sine, triangle, sawtooth, and pulse — plus a sub-oscillator one octave below. Designed for minimal HP footprint.
ALM. Beast's Chalkboard: Octave Switcher + More
Handles octave transposition, portamento/glide, and note quantisation. Designed for keyboard or sequencer integration, translating incoming pitch CV into clean octave intervals.
ALM. Pamela's PRO Workout: Clocking Modulator
Eight independent clock outputs, each configurable with Euclidean rhythms, clock multiplication and division, LFO waveforms, probability, and swing. Functions as the timing backbone of a system.
ALM. MFX: Stereo Multi Effects Processor
Stereo effects unit with reverb, delay, chorus, phaser, and pitch-shifting algorithms. Key parameters are voltage-controllable, allowing dynamic modulation of spatial and temporal effects.
ALM. Tyso Daiko: Dual 12 Bit Digital Drum Voice
Two independent 12-bit digital percussion synthesisers. Each voice combines oscillator and noise sources with decay envelopes, covering kick, snare, tom, and noise-based sounds.
ALM. MCFx2: Dual State Variable Filter
Two independent state variable filters with simultaneous lowpass, bandpass, and highpass outputs per channel. Usable in series or parallel for subtractive shaping and frequency splitting.
ALM. Pip Slope: Compact Envelope Generator
Compact 4HP attack-release envelope with looping capability. Functions as an AR envelope on gate input or as a free-running LFO when looped, covering slow modulation to audio-rate cycling.
ALM. Akemie's Castle: Digital FM Dual VCO
Complex FM oscillator built around the Yamaha OPN chip architecture. Two operators with four selectable FM algorithms produce classic digital FM timbres ranging from bell-like harmonics to dense inharmonic spectra.
ALM. Quaid Megaslope: Multi-Mode Modulator
Four-stage function generator configurable as ADSR, AD, AR, or multi-stage complex envelope. Also operates as a tempo-synced or free LFO with voltage control over all stage durations.
ALM. HPO: Headphone Output
Stereo headphone amplifier with volume control. Converts modular signal levels to headphone-compatible output for direct monitoring without external hardware.
ALM. Passive Mult: 3HP Passive Multiple
Passive signal splitter in 3HP. One input divided across multiple outputs with no active buffering — suitable for CV distribution in low-impedance contexts.
COSMOTRONIC. Messor: Compressor and Transient Shaper
Stereo VCA compressor with threshold, ratio, attack, and release controls, combined with a transient shaper offering independent punch and sustain parameters. Useful for dynamic control of percussive or mixed signals.
COSMOTRONIC. Delta V: Dual Function Generator
Two independent function generators with voltage-controllable rise and fall times. Each can operate as an envelope triggered by gate or trigger inputs, or as a looping LFO with linear or exponential curves.
COSMOTRONIC. Vortex: Complex Dual Oscillator
Two analogue VCOs with linear FM, hard sync, and waveshaping. Designed for crossmodulation and complex timbral interaction, producing rich harmonic and inharmonic spectra.
COSMOTRONIC. Cosmix: Stereo Mixer
Compact stereo mixing module with per-channel level and pan controls. Clean signal path for submixing audio voices before output or further processing.
COSMOTRONIC. Peradam: Side Chained Distortion
Wavefolder and distortion unit with integrated sidechain ducking. An external trigger signal rhythmically reduces the distorted output amplitude, combining saturation with dynamic shaping.
EXPERT SLEEPERS. ES-9: 16-in/16-out USB Audio Interface
16-channel bidirectional USB audio interface bridging the modular system and a DAW at audio rates. Sends and receives both audio and CV, enabling tight software-hardware integration and multi-channel recording.
NOISE ENGINEERING. Cursus Iteritas Alia: Additive Oscillator Based on Dynamically Generated Wavetables
Additive oscillator generating dynamically evolving wavetables from a set of selectable harmonic modes. Each mode emphasises a different spectral structure, from smooth sine-based tones to dense, noisy textures.
ADDAC. VC Looper & Granular Processor: Granular Sampler
Voltage-controlled audio looper with integrated granular engine. Records and plays back loops while applying grain size, density, position, and pitch controls for live granular transformation of incoming audio.
ADDAC. VC T-Networks
Voltage-controlled passive attenuator using resistor ladder topology. Enables smooth CV-driven blending and attenuation of signals in a compact, low-noise format.
ADDAC. VC Triple Bandpass Filter
Three voltage-controllable bandpass filters with independent centre frequency and resonance per band. Can be used in parallel for formant-like filtering or in series for narrow spectral sculpting.
ADDAC. Balanced Inputs
Utility module converting balanced XLR line-level signals to unbalanced modular-level CV or audio. Enables clean interfacing with studio microphones, mixers, and external instruments.
ADDAC. Balanced Outputs
Converts unbalanced modular-level signals to balanced XLR output for connection to studio mixers, PA systems, or audio interfaces. Provides impedance matching and ground isolation.
ADDAC. REV2 VCO
Analogue VCO with sawtooth, triangle, sine, and variable-width pulse waveforms. Voltage control over pitch and pulse width, with hard sync and linear FM inputs for timbral modulation.
ADDAC. VCA Quintet Mixing Console
Five VCAs with individual CV control over gain, functioning simultaneously as a five-channel mixing console. Suited for polyphonic voice mixing or multi-source submixing with dynamic level control.
ADDAC. VC Fixed Filterbank
Voltage-controlled filterbank with fixed frequency bands across the spectrum. Each band level is adjustable via CV, enabling graphic EQ-style processing, formant filtering, and spectral morphing.
RITUAL ELECTRONICS. Aranea: 5x5 Matrix Mixer
Five-input, five-output matrix mixer where any input can be routed to any output at continuously variable levels. Essential for complex signal distribution, feedback network construction, and generative patching.
MAKE NOISE. Spectraphon: Spectral Degradation
Spectral processing module based on the superformula algorithm. Two partially overlapping synthesis voices manipulate the spectral content of incoming audio, producing harmonic degradation, spectral folding, and inharmonic transformation.
NEUZEIT INSTRUMENTS. Warp: Wavetable and Additive Synthesis
Hybrid oscillator combining wavetable scanning with additive layering. Multiple simultaneous partials can be shaped and morphed across wavetable positions, producing rich, evolving timbres from simple to highly complex spectra.